Picture1Marine TechnikSupply systems on ships and in power plants
HomePicture2CompanyProductsInnovationsContactDisclaimer


Further Equipment

HFO/MGO PRESSURIZED FUEL OIL SUPPLY MODULE for diesel engines testbed.
Designed for the operation with fuel oil-water -emulsion.
 

HFO/MGO PRESSURIZED FUEL OIL SUPPLY UNIT
Type: PBM - 0,6E

Diesel engines
Medium

Filtration
Heating medium
Power
Supply pump
Booster pump
up to 3.000kW
fuel oil-water -emulsion
up to IF 380cSt with 25% water content
10 micron abs.
electric
36kW (6x6kW)
1,2 m³/h - 0/7 bar
3,1 m³/h - 5/12 bar




For enlargement click
the illustration

The unit is in operation on testbed 21 for MAN-Augsburg since 2009. Frequency-regulated pumps allow tests with different diesel engine power.

HFO/MDO SUPPLY MODULE FOR TESTBED FOR MIDDLE SPEED DIESEL ENGINES
 

HFO/MDO Fuel Oil Supply Module
Type: PBM 380 E-4,5

HFO Quality

Heating medium
Power

Supply pump
Booster pump

Autom. filter finety
up to IF 380 cSt

electric
2 x 112 kW

5,6 m³/h
15,6 m³/h

10 micron abs.




For enlargement click
the illustration

Intended for testbed for MAN B&W Motor, Type 16V 48/60 B, up to 20 MW power, with a fuel oil consumption up to 4,5 m³/h.

"FILLING - FLUSHING - PRESSURE TESTING - EMPTYING"
ALL IN ONLY ONE WORKING STEP!
For systems and components to be flowed through under pressure with medium for example engine blocks, cooling- and lubricating plants, pumps and compressor housings, etc.
 

MOBIL TEST-PLANT for WATER PRESSURE TEST
Type: WPW 1

MOBIL TEST-PLANT for OIL PRESSURE TEST
Type: OPW 1

Type: WPW 1

Water service tank
Tank heating
Centrifugal pump
Press. control valve
Fine filter (in return line)
Connections
Control box


Type: OPW 1

Oil service tank
Pump aggregate
Press. control valve
Fine filter (in supply line)
Connections
Control box
Water Pressure Test-Plant

Volume 300 L, insulated
Electrical, 2 x 7,5 KW
1,0 m³/h – 9,5 bar
Adj. range 0 – 8 bar
Finety 50 µm
3 x Autom. hose wind-up
Heater, Step controlled


Oil Pressure Test-Plant

Volume 280 L
20 l/min – 5 bar
Adj. range 0 – 5 bar
Finety 20 µm
2 x Autom. hose wind-up
Pump “START/STOP”




For enlargement click
the illustration

The automatic hose wind-up make thereby mobility possible without "hose mixes". Clearly arranged switching armatures and indicating instruments make a simple handling possible.